-
I want to add camera drivers for ESP32 (I2S), ESP32S2 (I2S and some others) and ESP32S3 (LCD_CAM). I already have a working driver (esp-pacs + esp-idf-hal) for the ESP32 and ESP32S3.
I have two blo…
-
I am trying to connect ov7076 camera with nodemcu but there are no pin diagram available for the same. As nodemcu have storage equal to 4MBytes and memory 128KBytes. Is there any possibility to use it…
-
### Provide a brief description of the issue
Errors out with NoDevice despite the firmware upload and UVC initialization working as expected.
### Operating System version
Linux (Default)
…
-
Hi! I’m trying your Actcast alpha and have some problems which I want to share with you.
I’m using RPI3 with 3 cameras: RPI Camera v1.3, Omnivision 5647 IR for RPI and Logitec C270 USB.
So, I’ve g…
-
Hey there!
I have a problem with motioneye on Debian Jessie. I installed it according to the instructions here on github, which all worked out well. But when I try to add my webcam to it, I get the m…
-
Please update mido source to match kernel released with latest miui ROMs.
Since MIUI 7.5.11 camera config changed in rom to make Omnivision main camera dtected with camera id 1. Kernels built from r…
-
Hi!
I have Ububtu server 20.04 on raspberry pi 4 8Gb
I use **guvcview** to view the video, logitech usb webcamera works fine
PS4EYE is set-up properly, camera firmware patched, lsusb shows
**Bu…
-
**Is your enhancement proposal related to a problem? Please describe.**
Zephyr is supporting few image sensors (although the number is growing).
**Describe the solution you'd like**
Port mor…
-
I am running CoBang on a Pinephone with Arch Linux and Phosh.
Starting CoBang from the command line (SSH) shows:
$ cobang
(__main__.py:12121): GStreamer-CRITICAL **: 08:43:05.970: gst_element_mes…
-
I use a RaspberryPi 3b+ with a standard v1.2 RaspberryPi Camera. I run Raspbian Bullseye, but changed it so it works with the legacy camera drivers. I installed and compiled your v4l2rtspserver as des…