-
Nowadays people have a lot of unused laptops with powerful CPUs (much powerful than any Paspberry Pi and/or Radxa). It would be great to have running ruby GS on such hardware.
Another usecase is game…
-
I recently tried openIPC as the Air Unit of fpv,
when H264 encoding, QOpenHD and FPV_VR can be decoded normally,
But when trying H265, FPV_VR cannot be decoded,
I can see that received frames da…
-
Hi.
This looking interesting, have looked for an option to get WifiBroadcasting work on Windows...
Anyhow, is there a way to get working with OpenIPC?
-
my usb lte e3372 modem works fine on my gk7105v300 cam, but not on my ssc338q cam
i compared the kernel config from gk7205v300.generic-fpv.config with infinity6e-ssc012b.config, and noticed the follo…
-
Please add support for ESP32 based VTX described here: https://github.com/RomanLut/hx-esp32-cam-fpv
It has no security keys and uses JPEG compression. Otherwise looks similar to wfb-ng.
Why: it's …
-
Hello. I am currently testing the NVR board, with the main controller being HI3536DV100. I am now able to display images normally through HDMI. However, when I tried to share the network on my phone's…
-
I think that OpenIPC definitely deserves more recognition in the world of "shady" video surveillance systems.
**I opened this issue, so anybody can give ideas on how to increase OpenIPC popularity,…
-
There are 1000ms in one second.
0.1s = 100ms
From your photo it looks like the latency is 100-300ms, not 10-30ms.
-
>>@RomanLut I have been checking out your esp32 fpc cam project, can you share a binary for the esp32s3sense?
>Well, I can build you binary for s3sense, but you also have to build ground station on…
-
Successfully installed the lite firmware for subject. Logs shown the normal starting up of xhci drivers, but finally the following messages are shown:
```
xhci-hcd` xhci-hcd.0.auto: xHCI host not …