-
There is another MQTT-Gateway project under active development.
https://github.com/1technophile/OpenMQTTGateway
I believe that both projects address the same idea.
They both developed in differ…
-
home/OpenMQTTGateway/433toMQTT/5535011 5535011
home/OpenMQTTGateway/433toMQTT/5535011/protocol 1
home/OpenMQTTGateway/433toMQTT/5535011/length 24
home/OpenMQTTGateway/433toMQTT/5535011/delay 185
…
-
### Current Situation
I recently purchased a Liligo gateway (868 MHz) and flashed it with openmqttgateway. And I set it to 868 MHz to receive my wh51 moisture sensors, but I cannot detect any signa…
-
This looks like something I wanted to build in conjunction with the OpenMQTTGateway.
I guess this sketch could be used to build a sensor node for OpenMQTTGateway right?
The RF module (RCSwitch?) can…
-
ESP8266 crashes hard when using pilight build, and receiver is getting input (eg, by pressing kaku/nexa RF remote)
Serial console output:
```
************* WELCOME TO OpenMQTTGateway ************…
-
Running Home Assistant Core 2024.8.3 Supervisor 2024.08.0 Operating System 13.1 Frontend 20240809.0 with Mosquitto version 2.0.11 and OpenMQTTGateway v1.7.0 on both a Theengs plug and Lilygo LoRa. …
-
The TPMS-Jansite-Solar is supported by OMG since FSK can be enabled. With OMG 1.60 and 1.70 I face the following behaviour running OMG on a LilyGo. The sensor data is sent with the mqtt topic `OMG/OM…
-
Before submitting a problem please check the troubleshooting section
https://docs.openmqttgateway.com/upload/troubleshoot.html
**Describe the bug**
When in an managed AP environment (Extreme Netw…
-
I am trying to generate my own RF signal, because I have been unable to capture RF packets with the broadlink device. I have been able to use https://github.com/1technophile/OpenMQTTGateway
to captu…
-
Hello,
I am using this excellent project like a bridge of IR + RF433 + Bluetooth
Since I started to use the bridge, I could see some interference at home with other RF 433 devices (for example in m…