-
This script is great!But it would improve by adding the payload for the state of Arm and Disarm making it compatible with other systems (eg: Home Assistant)
It's possible? V2 does it already ....
…
-
Is there a easy way to get the triggered by what Zones when armed. I get armed disarmed triggered via the Pai alarm Panel but it would be nice if the alarm panel integration could show what Zone or z…
-
Hi @maragelis,
Thank you for the great work you are doing to make our SP systems smarter than they are. I've decided to make the move from ESP8266 to ESP32 on my SP5500 board.
This is the ESP-32 3…
-
Hi,
I am using a Wemos D1 Mini Pro and a buck converter connected to the Gnd and + serial pins of the MG5050 alarm system. I have properly soldered the pins and checked the connections several time…
-
The script is running fine, publishing some events to the broker, but as in case of #2 or #3, there are no labels. For zone open/close events, there is no information on which zone is affected. I've a…
-
Hello,
I've got an EVO192, and tried your great code, but of course, it won't work perfectly :)
(Of course it works fine at a friend of mine, who has a MG5050)
I modified the config, to skip the labe…
mnmn2 updated
4 years ago
-
Hello Tertius,
First of all, thank you for your work and developing this software.
After managing to configure the MQTT server this is what I am getting when trying to connect to my control panel.
…
-
Hi all...
so understandably Paradox is not so sharing about what ports is what on the board, or well more than what i can find online atm.
Attached is the best image i can get of a current SP6000…
-
### Creating & Using Basic Hard Science: Componentology
**Abstract**
Componentology is a new branch of basic science, which is the right theoretical foundation to successfully conduct applied rese…
-
Any guide on how to use the Coral TPU Dev board (not the Coral USB Accelerator)?
Thanks.