-
### Category
Hardware Compatibility
### Hardware
Raspberry Pi Pico (W)
### Firmware Version
2.3.7.30fbcab
### Description
The Pico W works just fine with GPS, but the firmware doesn't allow it …
-
When a project has multiple executables, there is apparently no way to specify which one will be loaded or debugged. As an example, the `picow_blink` example has two executables: `picow_blink` and `pi…
-
This came up in the SDK forum, where @kilograham asked for a pico-feedback issue, so that it can be better documented.
https://forums.raspberrypi.com/viewtopic.php?t=376508&sid=19c9d2fc64cb0e6ba4d4…
-
A user reported to IO Support that their values for a 2.25v source on any analog input pin on the pico was minimal / unexpectedly small (0.3v).
Testing locally I see a value between 2 and 1023 bein…
tyeth updated
2 weeks ago
-
With the new PicoW release last week, this seems like an ideal time to upgrade this logic analyser. Since the WiFi chip uses SPI for communication, I guess it is going to be faster than the USB serial…
-
Hi,
I am using Pico W, and its SDK, while i try to build the code through VScode i got the following error
Could you please help, how to resolve this issues,
Thanks.
Build Logs:
[build] [ 54%…
romal updated
2 months ago
-
Hi,
I like this library and use it with ESP32 without any problem . I recently migrated to raspberry picow and tried this library but it didn’t work. The code compiled fine but there is No Data from …
-
Hi,
I like this library and use it with ESP32. I recently migrated to raspberry picow and tried this library but it didn’t work(as it’s not supported for picow). Are there any plans for supporting ra…
-
Hi guys,
I'm trying to setup SysTick handler on a picow board. What I konw roughly is
1. Setup the SysTick by programming the syst_csr/syst_rvr registers
2. Setup the IRQ handler by calling irq_set…
-
The new Pico 2 seems to have one more Test Pad on the bottom. It should be documented.
In addition, you can also redirect USB DP/DM to any GPIO. Maybe show that in advanced mode too?