-
Do you plan to add timestamping support to plutoSDR FW?
-
Hello,
Could you please provide more details on how to write firmware to the internal flash drive? I've successfully run your firmware from the SD Card and now want to transfer it to the QSPI flash…
-
Hello
I am running into issues building v0.34 firmware for the E200 AntSDR. I am using Ubuntu version 22.04 and Vivado 2019.1. Any help is greatly appreciated.
The error I am experiencing is as …
-
hi. how can i build the uboot and linux kernel & rootfs? are they open sourced? i didn't find any place that have structure similar to https://github.com/analogdevicesinc/plutosdr-fw . so i cant use t…
-
Hi, could you please assist with the following issue or provide hints what to try next?
### Problem
Cannot extend SDR range with [official instructions from AD]( https://wiki.analog.com/university…
-
If You loaded FW from official site istade of pluto plus FW, ...just change jumpers :
to this:
**When using the official ADI-PlutoSDR firmware, please connect to URST-MI052.**
When using Pluto+ f…
-
Dear Howard, PlutoPlus,
Can you publish the bitstreams for version 0.32.1 and the 0.33.3 firmware?
I would like to experiment with the Linux environment without setting up the Vivado environment.…
-
When using gnuradio, the sample rate cannot be set above 5MSPS, otherwise the waveform is not right.
![Screenshot from 2021-11-21 10-22-32](https://user-images.githubusercontent.com/8504573/1427468…
-
Hi, I realize that you aren't responsible for the LibreSDR but I kinda need help
I tried to copy your pre-built firmware on a freshly formated SD card fileformat FAT32
my LibreSDR does not seem …
-
- [x] Add a folder `build_scripts` where buildscripts for the various artifacts reside.
This enables re-usage of the scripts for the end-user as well as for the automated Github actions.
- [x] A…