-
### Description of the bug
Current slicer profiles for MK4 + MMU3 (1.13.2) offer support for 0.4mm nozzle only. We need more nozzle sizes supported
### Project file & How to reproduce
Selection "C…
thess updated
2 weeks ago
-
### Description of the bug
The new option --material-profile works with multi-material printers but gets silently ignored with single-material printers.
For the following examples, I set the filam…
-
Hello
First of all sorry if my English is not 100% correct.
Second, I installed repsnapper I connected after load the marlin by arduino software... I printed a few squares to configurate the setting …
-
### Description of the bug
With Firmaware 3_13_1 the Nozzle get "Thermal Anomaly" on my MK3S+
It's not possible to do a PID-calibration.
Works fine with firmware 3_11_0 but now newer that that.
…
-
### Description of the bug
When printing gcode with color changes on MK3S, the LCD on printer does not show the time remaining until a color change. It only shows the total time remaining for the pri…
-
### Did you test the latest `bugfix-2.1.x` code?
Yes, and the problem still exists.
### Bug Description
The M600 filament change function is not operational in the lvgl ui (mks ui) interface.…
-
This is a Prusa MK3S, with the latest firmware (3.14) printing from the SD card.
Every time I try to print a specific gcode file, the printer fails saying that there has been a z-axis error. At fi…
-
**Printer type** - all
**Printer firmware version** - all Buddy
**Original or Custom firmware** - Original
**Optional upgrades** - N/A
**USB drive or USB/Octoprint** Octoprint
**Describ…
-
### What happened?
Starting from a multi-extruder printer profile, where each extruder doesn't have an associated color, I tried to slice a multi-color object.
The 3D view properly shows the object…
-
### Cura Version
5.7.0
### Operating System
Windows 10
### Printer
Prusa I3
### Name abnormal settings
None
### Describe model location
Slightly forward
### Describe your model
Bracket
###…