-
I have uploaded the motor code to arduino nano and connected to raspberry pi. when i open control in pypilot, its showing none.
-
Hello :)
I've done similar instrument display but on esp32.
The code is here: https://github.com/bareboat-necessities/bbn-m5stack-tough
It might give you some ideas as well. There are some exampl…
-
I’ve done a similar project.
You might find some code useful and re-usable in yours. :)
UI is LVGL.
and various protocol parsers.
pypilot tcp, Victron MQTT, SignalK tcp,
NMEA 0183. MDNS discov…
-
M5stack issued
https://shop.m5stack.com/products/m5stack-coremp135-w-stm32mp135d
It’s actually not a microcontroller. It’s a 512MB RAM Linux computer with Debian Linux, two CAN bus interfaces, …
-
Precompiled pypilot.tcz images to replace the one on the tinypilot image, for fast-n-easy upgrading of the pypilot version.
Seems to work. Ref. https://forum.openmarine.net/showthread.php?tid=4403&…
-
OpenCPN plugin fails to connect to pypilot if config dialog window not visited.
I have to open/close config dialog of pypilot plugin on each OpenCPN restart
-
Can't get it to start now, if throws `ImportError: cannot import name 'Markup' from 'flask' (/usr/local/lib/python3.9/dist-packages/flask/__init__.py)`
Pretty straight from github; see attached.
[…
-
Display wave height/period/white cap probability/boat left-right heeling period/amplitude/G-force on dashboard
Assuming pypilot can implement it from IMU readings.
You might have to agree on cus…
-
These exceptions occur both in pypilot 0.24 and 0.34, against a Signal K Server version 1.44.0.
Might be related to https://www.cruisersforum.com/forums/f134/opencpn-5-6-2-signalk-connection-causes…
-
pigpiod and any pigpio specific features wouldn’t work
on pi5. Seatalk1 SignalK plugin which requires pigpiod and pypilot hat UI will no longer be supported.
Details: https://forums.raspberrypi.com/…