-
- [x] import NES titles
- [x] make site support multiple platforms
- [x] import all platforms
- [ ] check metadata for all roms
- [ ] gamelist.xml export script
- [ ] generate zipped archives of …
-
I have been having difficulty in implementing this on the multicomp. The code runs except for reading the sd card. I am using a 1 GB sd card formatted for FAT 16 and it appears not to get the boot blo…
-
> **Tiny68k**
>
> Bill Shen's Tiny68k is a 68000 board with 16M of RAM and a 68681:
>
> https://www.retrobrewcomputers.org/doku.php?id=boards:sbc:tiny68k:tiny68k_rev2
>
> Fetch the Tiny68K mo…
-
do you have plans for adding the Z80 SIO to the list of emulated chips?
-
On my micro8088, with v1.0 of the 8088_bios, right before OS load, there's a moment in the startup where the keyboard_clock line goes dead and never recovers. Rolling back to v0.95, this problem does …
-
Sorry if this is the wrong way to communicate but I am having trouble compiling the project as it gives an error saying that Error (10481): VHDL Use Clause error at SBCTextDisplayRGB.vhd(295): design …
-
Hello,
i try to use SD card with the 4PIO card on the SBC V2-005i (4,8 & 10 Mhz) , but i all ways get an command error at boot up.
My config at sd.asm
> SD_DEVMAX .E…
-
Dunno if you welcome issues with the 3.1.1 pre-release but I tried UNA on Mark IV and got the following error when booting CP/M from the ROM:-
Welcome to Single Board Computing on the N8VEM SBC Z18…
-
Hi all,
As delivered, the compact flash card in de RC2014 hardware contains 8 slices.
They are assigned designations from C: to J:
C: through H: contain meaningfull files, whereas I: and J:, afai…
-
Hi Wayne, in my case, using the TUNE.COM CP/M program with the YM2149 board configured in the $60 IO address range for the SC126, the card is not recognized and defaults to the SCG adapter:
_______…