-
Use the SPI Driver to setup functions to configure and interact with the RFM95 LoRa Module
-
Am using an lilygo t- beam board to transmit data to stm32f103c8 interfaced with rfm95 lorawan module(sx1276 chip) and it does not work while following keenly your tutorial video and using DIO0 and EX…
-
First many for your project!! it's working very well, I like it.
Since 1 week I face to an issue, I want to had your bee counter to my system.
I developed a PCB with an ESP32 wroom 32 with weight …
-
Hi, a friend had a lot of issues to send LORA frames (not lorawan). The rfm-pcb and the d1 mini are stacked. When he send frames, the usb communication is e. g. corrupted.
After a lot of try&error…
-
Hello I would like to know if this library can be used for p2p coms. if it is possible could someone make an example this would really help me out. I have been trying to get p2p working with the RFM95…
-
Hi there.
I have very little knowledge of coding, but am trying to get your code working on my ESP32/RF69
I have input my data for the wifi and mqtt and am able to see the esp32 on my home assista…
-
1. LoRa Modules: HopeRF RFM95/96/97/98, Semtech SX1276/77/78/79 (1280 is compatible with ExpressLRS), RAK Wireless RAK811(?)
2. Xbee Modules: Xbee Pro 900HP, Xbee 3 Pro, Xbee SX
Xbee modules are more…
-
The current RFM69 library used (from lowpowerlabs) does not support the RFM95 LoRa radios. The GW should either move to the rocketlabs library (that supports both) or at least use it to support RFM95 …
-
I'm looking at: https://cdn.sparkfun.com/assets/learn_tutorials/8/0/4/RFM95_96_97_98W.pdf (page 85).
The code in RH_RF95.h shows:
#define RH_RF95_REG_13_RX_NB_BYTES 0x13
b…
-
Hi,
I am having some problems in order to connect my Grove RFM95 Lora module to the things network. The module manufacturer recommends to use the LMIC_LIBRARY to connect this Lora module to TTN. Th…