-
this thing should not take 6 gigabytes to install or be almost a gigabyte compressed
-
-
Hello, I cannot get the RPI camera module 3 working with a PI2 V1.0.1 and klipper kernel V1.0.5. I got an USB webcam working without issues. Here are the logs. What should I do?
[crowsnest (17).log](…
-
I'm experiencing a boot issue on RPI5 as follows:
1) When I try to boot it with uSD card having bootloader update firmware, it flashes 4 long, 5 short and red screen on display.
2) When the uSD …
-
Works on Rpi 3A+ with USB to Ethernet on Ps4 Slim 9.00 and also through an unmanaged TP-Link switch. Takes 4 or 5 attempts but been 80-90% successful with only one kernel panic so far. Unable to acces…
-
## Describe the bug
The Raspberry Pi (RPi) WiFi connection irregularly fails to connect to any external IP address, as described here: https://github.com/raspberrypi/bookworm-feedback/issues/220#issu…
-
### Describe the issue you are experiencing
I am running HA OS on an RPI 5 with NVMe SSD drive.
The network cable is connected to a 1Gbps switch and no matter what I do on the switch (Auto, forced …
-
- Platform/operating system :
RPI5 8GB
NAME="Raspbian GNU/Linux"
VERSION_ID="10"
VERSION="10 (buster)"
aarch64 (64-Bit)
- Python version (run `python -version` or `python3 -version`): Python…
-
Good morning,
I know that the topic has already been discussed but my limited knowledge is blocking me. I just purchased a banana pi-r3. While browsing the forum I saw that several people were l…
-
`sudo rpi-clone -f sdc`
```bash
~ "^/boot(/firmware)?$" && == "vfat" { print substr(, 2); exit }
```
Unable to locate boot device
https://github.com/geerlingguy/rpi-clone/blob/deda2cb3498…