-
Hi,
i am using a RTL SDR v4 with rtl_433 under Linux no problem. Everything works fine.
Under Windows i used Zadig to switch my Blog v4 device to WinUSB (v6.1.7600.16385).
But if i run rtl_433…
-
This device is similar enough to the ThermoPro TP829B that I was able to key off of the support implemented for it, but different enough that the existing encoder isn't working.
I have the followin…
-
Hi,
Could you please add support for SDRPlay devices?
- RSPdx and RSPDuo
Also RTL_TCP (most used form of connection to RTL SDR) and Spyserver (used by SDR#)
-
I have a Nooelec Nano 3 that I'm trying to use for 433 MHz signals with dedicated SMA antenna for 433 MHz (it's about 17cm long and was sold to me as a 3dB antenna).
I notice strange behaviour wit…
-
Hello!
I compiled **auto_sdr** from sources (devel branch). What do I need to add to the config to connect to specific address and port of rtl_tcp server?
-
**RTL-TCP reception**
It is often better to use an SDR receiver in a remote location, and is often accessed via RTL-TCP.
SATDUMP already has support for it, but the reception scripts do not support …
-
Hello!
Would you please consider to allow connecting RTL-SDR Tuner via TCP with RTL_TCP command or AirSpy Server.
Thanks!
-
Hi Im running two separate windows cmd prompts. One running RTL_TCP and ONE Running RTLAMR | RTLAMR-COLLECT.
It appears RTL_TCP quits unexpectedly and I have to restart both. The timing does not ma…
-
Followup to https://github.com/merbanan/rtl_433/issues/3080.
Similar to https://github.com/merbanan/rtl_433/issues/2621, `git checkout 22.11` is OK.
`23.11` and `master` are producing the same error…
-
sometimes when using rtl_tcp as a source, a socket error happens and the socket is disconnected. this can easily be replicated by simply killing rtl_tcp. However, when this happens, t-r doesn't seem…