-
```
libretiny:
board: generic-rtl8710bn-2mb-788k
framework:
version: dev
```
not work
```
libretiny:
board: generic-rtl8710bn-2mb-788k
framework:
version: 1.1.0
```
…
-
Chip: RTL8710BN
Board: BEELITE smart plug
Issue: Wifi reconnection loop after OTA upload
Current
Power cycle fix the issue
Reboot after too many wifi connection error fix the issue as well.…
-
I have generic Tuya smart sockets with a T102-V1.1 board, but it doesn't have the RTL8710BN, but the BX, without the 4 MB flash, according to ltchiptool, it has a 2 MB flash. I have installed ESPHome …
-
The Homey-app ESPHome should also support the “libreTiny” component.
This component contains platform-specific options for the [LibreTiny](https://docs.libretiny.eu/) platform. It provides support f…
-
First of all thanks a lot for your amazing work.
Since it's not possible to start a discussion I had to open an issue.
Do you still have plans for the RTL8710BN, since I don't see releases for it an…
-
### The problem
The second OTA upload fails.
Starting with a fresh mains unplug/plug of the device, I can push a new esphome fw OTA upload.
After that, every other OTA attempt fails with a `MD5…
-
Enabling MQTT in the ESPHome for "realtek-ambz" produces the error:
```
Processing sw09 (board: wr3; framework: arduino; platform: https://github.com/kuba2k2/libretuya.git)
----------------------…
-
I have an RTL8710BX based Tenda Beli SP3 smart plug that is not Tuya. When trying to upload the Esphome uf2 file generated from the 2023.9.0b1 beta, I get this error:
`E: ValueError: Failed to writ…
-
Hello,
i am using ESPhome to flash my Tekin SP22 smart plug. It has a T102_V1.1 board with an RTL8710BN chip on it. Sadly GPIO PA15, which is driving the Relay is not working. If i change the outp…
-
Cool project. I hope it's ok for me to add this as an issue, feel free to close it.
In case you don't know there is a $ 100 bounty on platformio RTL8720DN support:
https://github.com/platformio/…