-
Greetings,
I am having trouble convincing the official hardware to read out TRACESWO from an Arduino Due (SAM3X8E).
I have recently extended the [SerialWireOutput](/koendv/SerialWireOutput) libr…
-
The library does not compile for the new ARM-Based boards. The issue is probably some dependence on the avr progmem library.
-
Is there a plan to support SAM3X8E processor from [Arduino Due](https://docs.arduino.cc/hardware/due) for SBB Strategy ?
I have a project with D1Mini (ESP8266), Mega 2560, Nano and/or Pro -mini and…
-
_From @cjbaar on November 7, 2016 17:8_
I have been using several Arduino Due boards under the beta IDE (1.5.8). Previously, I was able to successfully maintain a continuous serial connection between…
-
Add new board definitions based on [this gist](https://gist.github.com/ah01/762576)
```c++
#if defined(__AVR_ATmega168__)
// Arduino Diecimila and older
LINE("__AVR_ATmega168__", __AVR…
-
Hi, I used savvycan with the SAM3X8E microcontroller, it was possible to combine CAN0 with CAN1 at different speeds and it worked as CAN gateway, now I use esp32 CAN0 and CAN1 on MCP2517FD works great…
-
Hi!
Is it possible to extend OTA support for Atmel SAM3X8E ARM Cortex-M3 ?
The architecture is quite similar with already supported platforms and from the first look, it should be possible to do, bu…
-
### Description
Is it possible to have SD firmware option for SAM3X8E (DUE) based boards?
I could see from configuration_adv.h file #define SD_FIRMWARE_UPDATE command exists, but it is only for …
-
I am currently porting Embox kernel to _Arduino Due_. This controller is based on MCU _Atmel SAM3X8E_ with _ARM Cortex-M3_ core. To do this, I created three files:
- `templates/arm/arduino_due/buil…
-
1- PCB üretim için gönderildi sam3x8e_V2A
2-Malzemeler için tedarikçi aranıyor.
3-PCB için üretilen kutu 3d yazıcı ile baskıya alındı(V1A kutu çizimi gönderildi).