-
I'm having trouble changing the decimation factor using the SCPI command ACQ:DEC. It works fine with 1, 2, 4, 8, 16 and 32 but if I tell the RP to use a decimation factor greater than 32 (using powers…
-
In embedded EEZ-Flow projects I would like to be able to easily generate code that processes SCPI commands. For this a UI interface is needed to specify the SCPI commands (probably a panel derived fro…
-
I need to adquire one sample or a fixed number of samples (say 10-100) after each trigger event and save to buffer.
For example, I have a trigger running at 1 KHz connected to channel 2. I start ac…
-
* `FREQuency` or `PERiod` for the base clock
* `CHANnel#:NUMerator` and `CHANnel#:DENominator` to set the multiplier for a channel
* `CHANnel#:DELay` to set the delay/phase
* `CHANnel#:WIDth` for t…
-
I was asked to add a help mechanism to list all currently supported scpi commands. Hopefully I haven't overlooked another implementation somewhere. I'd love to hear your thoughts on the approach desc…
-
How much of trouble is to support SCPI commands list in PROGMEM on AVR? Usually, there is not much SRAM on these microcontrollers (in my case 8K) and my SCPI commands list is taking a lots of it and s…
-
Some of the DIO support PWM. Add SCPI commands to configure and enable PWM on individual DIO channels.
-
@BrandonMehlenbacher
>I was thinking about this today about how some instruments are run off of SCPI commands but fall under other categories. For instance, the thorlabs power meter and the newport …
-
It is a reality, for various reasons, that similar instruments from different vendors exist in the market. So when we do a lab activity, we often use generic name, eg: oscilloscope and not Tektronix T…
-
Background:
I have about 20 programmable instruments on my bench, only about half are SCPI-compliant but most of the rest support IEEE 488.2 "star" commands.
I suggest moving the commands define…