-
### Board
ESP32 Dev Board
### Device Description
ESP32 Dev kit.
Micro SD card breakout board (3.3V).
### Hardware Configuration
GPIO 5 connected to CS
GPIO 23 connected to MOSI
GPIO 18 connec…
-
When a SD card is inserted into a board defined SD card port, we should automount it in CircuitPython and make it available over the CP workflow. The SPI or SDIO bus will need to be board defined so i…
-
### Bambu Studio Version
1.9.3.50
### Where is the application from?
Bambu Lab Official website
### OS version
win 11
### Additional system information
_No response_
### Printer
p1s
### How …
-
I believe this is a known issue, but while it is possible to mount a partition on the 1st SD card, it is not possible to save the overlay. As such, the drive needs to be mapped each time the system is…
-
Hi,
There seems to be an issue with transferring bigger files to 512GB SD cards when the Anbernic RG405m is connected to USB (file transfer)
I have tried two 512GBs one Samsung and another Sand…
-
Hello, I found out that some SD-cards could not get mounted-are not recognized.
Device Cheap-Yellow-Display.
I have 2 manufact. Sandisk 16 GB , Intenso 4 GB, the Sanisk card works with the playe…
-
### Describe the bug
The moment I go to read the files created by BlackBox into my DarwinFPV CineApe25 I find only partial data and holes. I have tried various SD Cards but this does not seem to solv…
-
### Is there an existing issue for this problem?
- [X] I have searched the existing issues
### What part of EdgeTX is the focus of this bug?
Transmitter firmware
### Current Behavior
Wh…
-
Hi all,
both my cameras were update to newest firmware 3.2.0.30 and both now fail to see the SD card.
I have tried formatting, new cards, different sizes, to no avail.
As if the firmware disabled t…
-
So I was trying this on both my Lombard and my B&W G3 and I found when using my IDE-to-SD as well as a Maxtor Hard drive, selecting a drive to partition/format/prepare in the initial part of the proce…