-
I am in the process of reproducing this project and have the required hardware in place:
1. Nordic NRF52832 Development Kit
2. OPTIGA Trust X Shield2Go
I am facing an issue in the following step:
…
-
We need help to implement I2S on ESP32-WROOM 32D. We can't access Infineon IM69D130 even after register Infineon new account. It requires Infineon Application Engineer to approve and grant the softwar…
-
I am also following #34 to test a working example azure-optga-trust-m provision_test_certificate. I was able to successfully build the code for esp32-s2 but I could not figure out where to provide GPI…
-
Hi,
I want to build a small enclosure or holder for the shield2go board. Therefor it would be great to have the dimensions of the board.
I found on the infion website a blend4web viewer, but there…
-
Hi,
I tried out the Cartesian example with an ESP32 module. However, the code won't compile in Arduino IDE.
Error message:
```
Arduino: 1.8.16 (Mac OS X), Board: "ESP32 Dev Module, Disabled…
-
Hi,
I am using the im69df130 shield2go in combination with the raspberry 3, like it is recommend in your tutorial. I followed the tutorial step by step and i get some data from the sensor. so far s…
-
I'm trying to calculate sound pressure in dBSPL scale.
I extended the example soundPressureLevel to get the dBSPL by using the following conversion formulas:
dbFS = 20 * log10(abs(maxSample - min…
-
When trying the library with a '3D magnetic sensor 2GO' board, with example 'Cartasian_low_power' is always shows this in serial monitor:
![image](https://user-images.githubusercontent.com/18257076…
-
Is it possible to post some simple example for dual TLV493D sensors? I follow the power up procedure described in the user manual, but with no luck.
Thanks!
-
Hello,
I want to provision my Trust X shield2Go using a self signed CA and RPi 3 according to [this tutorial.](https://github.com/Infineon/personalize-optiga-trust/blob/master/using-self-signed-ca/…