-
Allo Loup,
Je viens de recevoir le capteur SHT10 que j'ai commandé sur Amazon. Hé ben, c'est exactement le même que celui que j'ai commandé d'Aliexpress, il vient assurément de la même compagnie ch…
-
RPi3: [pH (i2c-T3)] //[EC (i2c-T3)] //[Pt100] //[3chrelay (pump1, pump2, doser)]
USB: [USB cam]
Nano: BME280 (i2c pins A4,A5) //TSL2561 (i2c pins A4,A5) //SHT10 (pins 10,11) //2x flowsens (pins 2,3)…
-
as sht10 is a 14 bit device and arduino is 10 bit , i can't integrate both
-
这个app能读到温湿度吗?i2c的写地址都没有写
-
Need support for more than just Dallas One Wire temperature sensors, including but not limited to average/mean of a number of sensors.
-
I've been trying to get an SHT10 to work on a moteino (http://lowpowerlab.com/moteino/) which works at 3.3v and 8Mhz, but the readings all come back weird (-40c,-40f, and -4.6%). Is there something t…
zippy updated
8 years ago
-
Hello, I am working with the sht10 sensor, and a lcd i2c screen, the sensor works perfectly, but when I connect the i2c screen on the same i2c ports the screen does not respond, I have in mind that th…
-
Sensors after v3 use a new set of more 'optimised' coefficients. The lib only uses the old ones.
New coefficients
C1 = -2.0468;
C2 = 0.0367;
C3 = -0.0000015955;
relevant lines 82 to 84 in S…
cenau updated
8 years ago
-
@Staars
Hi Staars, ;-)
found the AM2322 by ali exress:
https://nl.aliexpress.com/item/AM2322-Digital-Temperature-and-Humidity-Sensor-module-Replaced-SHT21-SHT10-SHT11/32698701164.html
He look…
-
May I request support for the HUM1000 to display on the LCD. I am going to be water-quenching my roast to cool it quickly. My beans cool in the roast chamber.
It would be great to get some consiste…