-
Hello @Patryk27, thanks for this crate, I was really glad to see there was a `simavr` wrapper for my project:
https://github.com/brainstorm/embassy-as5600/tree/avr_tester
But I'm facing some FFI…
-
- Try to find some documentation.
- Write a template that allows for easy tracing of registers and easy manipulation of Input ports
- Check how Uart woks
- Maybe write a C++ wrapper
cmnrd updated
9 years ago
-
When replacing simreprap/shared/simavr with the current version of simavr, the variable SIMAVR in the top Makefile conflicts with a like-named variable in the simavrs' Makefile.common. Changing the na…
-
# Debugging attiny85 code, part 2: Automating GDB with scripts :: blog.oddbit.com
This is the second of three posts about using gdb and simavr to debug AVR code. The complete series is:
Part 1: Using…
-
When trying to run simavr the debugger fails stating load failed and no error.
My launch.json looks like this:
```
{
"version": "0.2.0",
"configurations": [
{
"t…
Con30 updated
2 years ago
-
Sadly the [gpsim](http://gpsim.sourceforge.net/) and [simavr](https://github.com/buserror/simavr) dependencies come bundled into the source code. That IMHO is a very bad practice. On [this branch](htt…
-
```
#include
int main()
{
sleep_mode();
}
```
Fails
`nix shell ".#pkgsCross.avr.stdenv.cc" --command avr-gcc -mmcu=attiny2313a main.c`
Doesn't fail
`nix shell ".#pkgsCross.avr.std…
-
First of all, thank you for this project, it's really nice.
Would like to ask if it's any development towards, a custom target that runs ie. simavr, and connect to it, without to running it on ever…
-
# Debugging attiny85 code, part 3: Tracing with simavr · The Odd Bit
This is the third of three posts about using gdb and simavr to debug AVR code. The complete series is:
Part 1: Using GDB
A walkt…
-
For a project with an Atmega324P I use special sections to ensure that some code is located on desired addresses. Works fine on real target, but these sections are not loaded proper in simavr.
**An…