-
Hi guys,
I have exactly this same problem like lucasgomesgs0 - [Blank bar on 256x64 SSD1322 OLED display](https://github.com/olikraus/u8g2/issues/2379#top)
#2379
![image](https://github.com/olikrau…
-
Hi,
I am using some more cheap SSD1322 lcd. I think it is simple driver issue.
I got display from here:
https://www.ebay.com/itm/134658751869
only SPI support, Support 256x64 resolution
displ…
-
I'm debating whether to port my driver across to Arduino from rPi, or use an existing library. I've tried yours but I can't get it to compile....
Any thoughts?
Build options changed, rebuilding all…
-
In init for ssd1322(grayscale) you have 👍
command(0xA4) // Display off (all pixels off)
I do think it should be 0xAE, like for Newhaven type display that has the same ssd1322, also the manual s…
-
Hello, I am attempting to set the contrast/brightness on [this](http://www.ebay.com/itm/131619441678?_trksid=p2060353.m1438.l2649&ssPageName=STRK%3AMEBIDX%3AIT), but it does not seem to respond to the…
-
supplied example no longer compiles.
C:\Ard\libraries\ESP8266_SSD1322\ESP8266_SSD1322.cpp: In member function 'void ESP8266_SSD1322::fastDrawBitmap(int16_t, int16_t, const uint8_t*, int16_t, int16_…
-
Hello,
This is not an issue regarding your driver but maybe you have found a similar issue with your display.
I'm having an issue regarding my SSD1322 display 256*64
I'm using the Solomom Systech…
-
Hi
I find this article
http://www.instructables.com/id/Arduino-analogue-ring-meter-on-colour-TFT-display/
and i'm trying to convert to U8GLIB, for ssd1322, or maybe something like it, so i can
have …
-
Once I use updateDisplayArea, it worked but then continues to work for all full buffer usage.
I tried some other full buffer demos and the same section in the corner was the only visible area. Thin…
-
Hi guys,
I'am in the process of upgrading my project from Python 3.7 to 3.9 but the Luma.oled library is spazzing out.. In the attached picture you see a scrolling text. With 3.7 everything works fin…