-
Seems to be a recurring issue with this driver. I'm sorry if this has been covered before. I'm an amateur when it comes to embedded and it's my first time doing it.
I have a Pi Pico with a Pimoroni…
-
Previously, you could run two SPI displays (I was able to run two 240x240 round displays) at the same time, so long that the CS and BL pins were different.
For reference, this was discussed on the …
-
Hi everyone,
I have encountered an issue when using the st7789 display on my pirate-audio board in Mopidy: This used to work some weeks (months) ago when I set up the system from scratch but now (a…
-
Hi,
I was trying to add the 240x240 display to the list, but I can't see how I should do it.
If I just add the template an offset to the image is set.
Probably I need to edit some data here:
`…
-
Hi, I'm having a hard time finding which are the pins for SCLK and MOSI for the LCD Screen in this board, as I've been using Adafruit ST7789 library until now and it needs them.
In the T-Display mo…
-
I have an ST7789 module that works fine until version 2.5.34, but after 2.5.43, the display is blank.
Hardware configuration including pin configuration is the same, I modified User_Setup_select.h an…
-
### Version
2.7.0
### Branch
master
### OS
Raspberry Pi OS Lite - 32 Bit Bullseye
### Pi model
Zero 1
### Hardware
Raspberry Pi Zero WH + Pirate Audio Mini-Amp with Display …
-
- Version of embedded-graphics: 0.8.1
- Target: RP2040
- Real hardware: ST7789
Some display devices support DMA to transmit data, such as SPI, I2C, etc. In this way, data is transmitted asynchronou…
-
Firstly I'd like to than you for this repo that help us so much is developping LVGL plateformio apps.
This issue question is clearly not an issue to your repository but more a question of understandi…
-
**Is your enhancement proposal related to a problem? Please describe.**
Unable to change the ST7789 display orientation.
**Describe the solution you'd like**
The ability to set the ST7789 displa…