-
hello everyone
i'd like to share some info and schematics for this "new" pcb/kit
it will not work correctly with existed hw because of shared pins for S1/RM and S2/GM, i cut button's wires and sol…
-
I have built three of these clocks and they are all having the same issue with this latest firmware. My clocks have the STCW408AS chip.
Everything starts off fine then...
At random times, usual…
-
Hello I checked your board. It is really great. I wanted the code that we need to upload on IO Expander STC15W408AS IC. As the code that needs to be uploaded on ESP32 is available, but I could not the…
-
Hi there,
looks like their might be a new hardware revision from banggod again (or I am doing something wrong).
The clock mostly worked with the original firmware, but was flickery.
Flashing th…
-
Can you please tell me how the pins of ESP32 are mapped to driver outputs, heaters and fans i.e in schematic I can see them connected through STC15W408AS controller which is communicating with esp32 u…
-
Why this option `--xram-size 0`? According to [STC Micro 8051 Microcontroller Notes](https://gist.github.com/trozodejamon/014ad06c36f25b99ef275c8c178a4571) for STC15W408AS the options should be `--ira…
-
Hi!
Synchronization of time with the GPS receiver conclusion of consecutive data of NMEA.
Prompt what GPS receiver to use and where to connect on the scheme of hours?
ghost updated
4 years ago
-
Thank you so much for developing this tool!
I am having a little trouble getting it to work with a STC15L2K32S2 with a PL2303 on OSX. It appears to detect the chip correctly:
```
python3.5 stcgal.py…
-
im trying to flash new fimrware to my v1.1 BD senor and im always getting this error
![bd](https://github.com/markniu/Bed_Distance_sensor/assets/89615269/5a2ecfb3-9069-4f46-9ac5-62d1a0b3e5cf)
i bou…
-
Hi
So this wired bug is only happens while doing a probing operations with BDsensor not mesh or calibrations.
HW:
Voron trident 350mm
BTT M8P Klipper Version: v0.12.0-61-gb50d6669
BTT EBB36 …