-
Is there a reason the usb module is disabled for stm32f105 series MCUs? The datasheet says it supports USB OTG FS.
```
#[cfg(all(
feature = "stm32-usbd",
any(feature = "stm32f102", feature…
-
Hi,
How can I add support to the STM32F105? What are the necessary steps. Am I able to do it by myself?
I was tinkering with board and env bluepill_f103c8 and basic GPIO was working but as soon …
-
### Is your feature request related to a problem? Please describe.
No
### Are you looking for hardware support?
No
### Describe the feature you want
Allow to restart the motherboard to …
-
stm32f10xxx.h中,stm32f105/107系列支持otg芯片使用USB_OTG_FS,f103系列使用的是USB。
stm32f1xx_hal_pcd_ex.c描述定义了USB后可以使用HAL_PCDEx_PMAConfig这个函数。
但rt-thread的适配驱动中,usbd_config.h使用的确是USB的宏定义;drv_usbd.c的_init(rt_device_t d…
-
I started building a new STM32 NMEA2000 CAN library on top of the STM32 CAN HAL library.
https://github.com/BitterAndReal/NMEA2000_STM32
I was not yet able to compile the NMEA2000 lib with STM32Cu…
-
Add gd32-spl-can example please
Thanks
Zharv updated
2 years ago
-
Hello Dala!
First, I just wanted to thank you for all the fantastic work you have been doing with the CAN bridge software! It made it possible for me to upgrade my 2012 LEAF with a 40kWh battery in…
-
I see there's some unfinished timer code in timer.rs. Whats the status of that and could you give any pointers on what needs to be done to get it working?
-
When trying to start modbus on a device with a st485bdr transceiver, where receive is constantly active (RE always low, DE controls by software), a busfault occurs during transmission. This problem oc…
-
Hello @csnol
Is this library compatible for all stm32f103xxt6 controllers or only C8 & CB?
I want to implement FOTA using stm32f103RET6 with esp32 Is that possible with this Library. please suggest…