-
The STM8 plattform has an embedded Bootloader which listens to commands in the very first seconds of the bootup-procedure. It has to be enabled by the option-bytes and is deactivated when read-protect…
-
some outputs offer PWM capabilities as alternate functions. But changing the option byte with `alternateFunctions()` shows no effect.
-
```
PS C:\Users\admin\Desktop\stm8flash> make -j5
GCC -g -O0 --std=gnu99 --pedantic -c -o stlink.o stlink.c
GCC -g -O0 --std=gnu99 --pedantic -c -o stlinkv2.o stlinkv2.c
GCC -g -O0 --std=g…
eeyrw updated
5 years ago
-
Hi!
I got into my hands over 10 boards with STM7 (72C334). I think it might be good for some of my projects.
Generally, I'm using Arduino IDE ALOT, so it would be awesome to use it to program tho…
-
Issue is just for tracking what was said in #38.
>However, debugging the Arduino framework code is currently not possible because of one freaking file failing compilation in --debug mode: WInterru…
-
I get the error `open serial port '/dev/bus/usb/001' ... Error: in 'init_port(/dev/bus/usb/001)': open port failed`
under mac and ubuntu wsl
lsusb output:
```
Bus 002 Device 001: ID 1d6b:0003 Li…
-
The FAQ mentions some advantages the BMP has over the ST-LINK.
However, the ST-LINK supports not only STM32, but also STM8.
How about STM8 support for the BMP?
Philipp
-
uploading code to sduino uno (STM8 Arduino clone) via serial bootloader fails due to an outdated version of stm8gal:
```
stm8gal (v1.2.0 beta)
load Intel hex file 'firmware.ihx' ... ok (2.7kB)
…
-
Hi,
After the update of platformio core to 5.1.0 I ran into this issue:
https://github.com/platformio/platformio-core/issues/3829
Which was a duplicated of this issue:
https://github.com/platformi…
-
stm8gal currently contains some non-free binary blobs for some target devices. They should be replaced by free software.
Philipp