-
The current source tree consists of STMicro's old firmware library, which is not released under the open source compatible terms. However, the latest [STM32CubeF1](http://www.st.com/web/catalog/tools/…
jserv updated
9 years ago
-
__GPDSC Spec clarification__
**1. Assumptions:**
- The GPDSC .xsd schema is the same as the PDSC schema, hence any PDSC element declared in the [spec](https://open-cmsis-pack.github.io/Open-CMS…
-
What other STM32 expansion boards than the IHM01A1 can I use with this code?
If that's the only board supported right now, how hard would it be to add support for a new board?
In particular, I'm loo…
-
We can avoid some possible robustness issues with overlapping arguments if we turn `-Wrestrict` back on. There are only a handful in an `x86_64 allmodconfig` build, and all appear to be the common "ap…
kees updated
2 months ago
-
This causes the usb device basic test to fail in CI. See old (unfixed) Mbed issue here: https://github.com/ARMmbed/mbed-os/issues/13215
-
The orignal source for the SVD files has dissapeared for the STMicro SVD files. Should look for an alternative and implement this once again.
-
Hello
As the STM32F411CCU6TR is backorder everywhere I was trying to find a replacement. None are stock but there are dev board on ebay with a STM32F411CEU6 and I was thinking of ordering one and tak…
-
### Description
Requesting HAL support in Marlin for STMicro's STM32 Nucleo-64 development boards with STM32G4 (STM32 G4) 32-bit MCUs.
https://www.st.com/resource/en/user_manual/dm005563…
-
Unless STMicro has done something truly weird with this chip, all the sizes for the memory-mapped I/O is all a byte too small, with nominally 1kB blocks being 0x3FF, and not 0x400 (like would be expec…
-
### Zig Version
0.11.0
### Steps to Reproduce and Observed Behavior
When running Microzig on an STM32F3DISCOVERY board, so with `-target thumb-freestanding-eabi -mcpu cortex_m4`, but only in …