-
Hello Sir,
I have run your code on my SX1301, unfortunately, it gives output unrecognized transceiver, when I run the number 1 on the list.
I am aware that your code is for SX1272/SX1276 but I …
-
- [x] The issue is present in the latest release.
- [x] I have searched the [issues](https://github.com/brocaar/chirpstack-concentratord) of this repository and believe that this is not a dup…
-
Make the repository compatible with SX1301 LoRa concentrators such as RAK2245.
mpous updated
2 years ago
-
Hi there,
I have LoRa gateway (RAK831) which has sx1301 chip for LoRa connectivity. My nodes are based on sx1278 chip. Frequency band is 433Mhz. In selecting the target radio transceiver sx1301 is no…
-
I'm working on an [application](https://github.com/brocaar/chirpstack-concentratord) which implements the SX1301/2 HAL as a daemon. One of the features is to re-configure the concentrator channel-plan…
-
Hi all!
Does chirpstack-gateway-bridge support the ability to connect Gateways built on the reference SX1302, SX1303?
The example configuration file itself says that it is intended for the SX130…
-
Hi,
When I am trying to select the lorawan gateway architecture, this is what happens. Even the hardware state is **_available_** and **_alive_**
![gw-screenshot](https://user-images.githubuserco…
-
I encountered an issue with an older RAK v1.5 where the concentrator reset pin was 17 instead of 25, which is the default specified in the variant file for COMP-RAKHM. This was causing an endless loop…
-
Hi,
I am using the current version of basicstation - 2.0.6 to connect against AWS IoT Core for LoRaWAN using OTAA.
The incoming router_config message structure is of type:
{"msgtype":"router_c…
-
Cm3+ and sx1301 concentrator...
![20220518_184133](https://user-images.githubusercontent.com/3359418/169108513-6d4001e5-dc62-4080-8b68-c4945cf29079.jpg)