-
Hi,
I've built the first one, adding inside an SD2IEC, and now I'm planning to build the second and last one, but this time I wish to put inside a Tapuino with display and buttons directly integrated…
-
Hi Peter,
I see that you are porting Tapuino to ESP32. It's very cool, since ESP32 is so much more capable!
Anyway - my name is Dawid, and I wrote a GUI library for the ESP32. As a proof-of-conc…
-
Hi, I build the tapuino reloaded 0.3 (last version without 2n2222), but when it starts, it stops on the initialization of the SD. Sometimes it fails and sometimes it freezes. I tried on other micro sd…
-
I have a Tapuino Reloaded 0.4 which has been sitting idle for some time. Plugged it in but does nothing on the display, yellow activity light stays lit and red power on the nano at the back. Seems s…
-
Hi
I am having some problems loading this TAP file. The tapuino is a wagiminator SMD model running 2.10.0 firmware.
Every other TAP files seems to load ok (Rambo, Transformers, etc).
I have tried 2…
-
Hello i work with arduino. I'm not much of a programmer but my skills are hardware. I love building things. I need help I was looking for a way to hook a arduino with SD card to the commodore 64 so i …
-
Firstly I would like to thank you for all your hard work with this fantastic PCB layout. I had a whole lot of fun assembling the PCB.
I did have a wee bit of trouble with the SD card not initilisi…
-
As taken from Glenn Holmer's commentary on https://www.youtube.com/watch?v=jtlAOdJmeDI&t=134s
This is a discussion item. Actual work will happen on subsequent issue items.
Here are some initial t…
-
Moved the ‘question” to the correct item.
The 1.3.1 version doesn’t have the jumper for the vcc/gnd swap, I wasn’t referring to this.
The solder jumper on the back and the jumper on the front, as in…
-
Hello
I'm digitizing MSX Italian cover tapes directly in raw TAP format. Very often, they won't convert into CAS correctly, therefore I'm forced to keep them in WAV format to use them. While this work…