-
I run an iVentoy PXE boot server. The one issue that comes up is that since it is not the DHCP server (TDNS is), it doesn't get the data from the initial DHCP request telling the server if it is a UEF…
-
I have created a Webmin priviledged user to use Filemin in a way that he could only access files in `/srv/tftp` executing as `tftp` user. That user can read/add/edit files without any issue. The probl…
-
## Dependencies
Switch to bash
```bash
sudo dpkg-reconfigure dash #####choose NO
```
Install dependecies
```bash
sudo apt update
sudo apt -y install libtool-bin \
python2 gcc make perl tofr…
-
I currently face the issue where the TFTP server seems to answer with the wrong IP address (from Docker). I am using the default docker-compose.yml file.
`10.10.0.103` is my client, `10.10.3.6` is …
-
## Description
Add RPi tftp boot booting to scale-network automation
## Acceptance Criteria
Be able to build a VM with the necessary config files and packages to tftp boot a number of RPi's.
…
-
following the steps on:
https://github.com/CarlFK/pici/wiki/Getting-Started#linux-litex
Sometimes it works, sometimes it gets stuck at:
Fetching from: UDP/6069
(no ascii spinner)
-
I'm getting consistently different crc values generated for the zImage when I check it with uimage -v across nfs (v3,udp) but it's fine on tftp.
The result of this is that I can't remote boot.
…
-
Hello, i dont have accsess into webGui on my **ODI Realtek DFP-34G-2C2**
I tried to switch the slot (**setenv**) and **reset_sw**. The commands in tty console are different from telnet.
I run st…
d0bro updated
1 month ago
-
I have CIPC-GC15HE.
But i bricked the cam.
I open the cam and i have 6 pin.
1: 0,8v
2: 0,8v
3: 0,8v
4: GND
5: 5v
6: 3,3v
It's possible to send with tftp a firmware ?
Where i can find a f…
Jamyz updated
5 years ago
-
The [PXE documentation in its current state](https://argos-research.github.io/documentation/pxe.html) isn't very helpful.
Since @privatereese is currently working on integrating a DHCP service into…