-
### Describe the bug
ISSUE:
RaspBerry Pi5 8G + Hat Geekworm X1015 + nvme WD_Black SN850X 2Tb PCIe 4.0.
Bootloader doesn't detect nvme WD_Black SN850X
![IMG_7825](https://github.com/user-attach…
Jixel updated
2 weeks ago
-
1. Readme should contain step-by-step instructions for newbies;
2. After creating SD card, should be chapters on how to flash bootloaders in hyper flash and how to setup U-Boot environment for bootin…
-
### Describe the bug
The otp helper rpi-otp-private-key is written that it should also have support for most legacy hardware as stated in the documentation "Using the One-Time Programmable Memory on …
-
Were I to design this bootloader from scratch, I would have the device connect to a server with a known IP during boot, check a version, and update if the version is different. I'm not sure how much w…
-
### Describe the bug
The recently added cacertder option enables storing a CA Certificate DER encoded file in the EEPROM. This is a really nice feature and conceptually similar to a use case I'm fa…
-
At netboot, a Raspberry5 board sends malformed UDP packets padded with zeros while pulling resources from the TFTP server. As it may be seen in the `raspberry5_ack_pad.pcapng.gz`, a Raspberry 5 may ac…
-
### Describe the bug
The raspberry Pi 5 PMIC does not make use of 5000 mA current offered by a charger via USB-PD PPS profile. Instead, it gets stuck at 3000mA even when a charger that advertises a P…
-
_From @whitesn on August 18, 2016 6:26_
Hello, so I am able to burn the bootloader and upload the "ReadNetworkSettings" sketch using Serial USB Comm.
I am also able to ping the default IP when the A…
-
How can I do this operation (and similar operation with TFTP):
> 6) Finally we TFTP'd the newroot.bin file to the device and used the bootloader command FLW to write it to flash.
Give please a ste…
-
### Describe the bug
I have an RPi 3A+, and an RPi Zero 2W; both run the 64-bit 'Lite' bookworm version of the OS. They do not use or need `rpi-eeprom` AFAIK. Trying to save some space, I was going…