-
With current micro
-
Is there an easy way to also receive the micro volt reading on the thermocouple inputs to be able to measure some micro volt components?
-
I have been using kiln controller to run an older kiln without issues for a couple of years.
I recently had an issue with the run ending at exactly the same time/temperature before I was unable to s…
-
We want to display the output for one more thermocouple, and have some additional graphs on the 'Monitoring' tab to join the temperature graph. This could be the target setpoints and/or the PID output…
-
# Current Implementation
Right now the thermocouple on the battery board is a AD8495 feeding into an ADS1015 I2C ADC. This has been working fine for us, but on the V3b spin of the boards the thermo…
-
Hi, I tried compiling the sample code for Thermocouple and upon checking the serial monitor output, it only reads "nan". I've checked that the thermocouple is functional, connected properly to CH0 and…
-
hi,
I tried to use the thermocouples on a raspberry pi which has nodered installed on it and by running the nodered script provided it came up with the error message: Flows stopped due to missing nod…
-
An `F` in the chat, they just need to be switched back in a future version.
-
(This is @michele-riva, writing from the LT Lab)
Trying to measure `T ~ -140C` with a K thermocouple gave the following exception:
```
ERROR:root:Traceback (most recent call last):
File "C:\…
-
When I test the TC with thermocople.py, the temperature values are unstable and I get the error messages ‘short circuit to ground’ and ‘short circuit to power’ between the measured values.
I have…