-
Hello,
I've been having an issue with rpitx. It transmits for a second, but then stops. The binary does not exit nor show any debug info on stdout.
Any thoughts on why this might be happeni…
-
I compiled a binary nexutil using the "Build and install nexutil" section in [nexmon_tx_task](https://github.com/seemoo-lab/nexmon_tx_task) , and copy the nexutil to the router. Running nexutil with …
-
Hello,
I am using the function pcap_sendqueue_transmit() to transmit high rate 64 bytes packets (from 600 packets/s to 60000 packets/s).
Depending on the type of test, packet interval can vary fro…
-
Does this actually work to adjust the power level to anything other than maxium?
https://github.com/sigfox-tech-radio/sigfox-ep-rf-api-st-s2lp/blob/417f31d94d4a95266c61f6b75f1cfa34a7fffe7e/src/manu…
-
APRS can send objects.
Like position of clubstation, repeaters and others and informing about opening hours or similar.
This could be a useful feature for the iGate.
-
My testing code is basically same as the RMT example , but remove the final `PulseCode::default()` from data. And some logging and delay are added.
It turns out that as long as I remove the final …
-
Hi,
When having the NVL sender in Codesys set to Transmit on change AND when having around 1000 tags (more the 256 bytes), the NVL receiver in nodered dont parse the data.
Is it just me?
-
transmit_canfd_example.py not working, but transmit_can_example.py is working. We have commented out receiver side and checked.
Error showing is as follows:
ics.transmit_messages(device, msg)
[ics.…
-
The screenshot is pretty self explanatory, I didn't change anything and I couldn't find anything in the logs. This doesn't just show up in the FFT but also when double checking with an other SDR. I tr…
-
### Description of the feature you're suggesting.
Add a new setting to disable transmit features. Maybe enable this by default. If the user accesses the transmit page, we show a warning message with …
jLynx updated
2 weeks ago