-
This is for beamline alignment lookup tables at i18
https://github.com/DiamondLightSource/i18-bluesky/issues/12
At the moment it only implements the StandardReadable interface
## Acceptance Cri…
-
I17 will be using the same type of ID as I10, I21 and I06. This issue is to create an ophyd_async device to control this type of ID.
This type of ID has 4 extra degrees of freedom beside the gap, eac…
-
-
There are a number of devices that might have different behavior when there is no beam e.g:
* Undulator gap is disabled
* XBPM feedback will not lock
At the moment for testing when there is no …
-
As per discussion with @callumforrester and @DiamondJoseph this is needed for db IO as this cannot be in a plan or a stub as it would clog the RunEngine
## problem description
i18 lookup tables…
-
After some discussions with Jae-Hong Lim, Pohang Accelerator Laboratory, South Korea it has been revealed that the treatment of the energy dispersion has problems in Oasys widgets.
As a reminder, …
srio updated
7 months ago
-
SRW supports simulations with multiple undulators, each with their own tabulated undulator. Use the attached simulation as a working example.
[srw_3_undulators_py.gz](https://github.com/radiasoft/s…
-
Following up from a conversation on mattermost: this issue can hold use cases for a DerivedSignal class. I'll include ours as comments.
> is there an ophyd-async way to derive signals from other si…
-
As developers on Artemis it will be good to be as specific as possible in the code about what every variable means. Specifically this is important for co-ordinate systems where the units and definitio…
-
propose new testcase (or new test):
check that a matched beam in an undulator stays at constant size