-
Configure GPAC multicast stream to deliver stream A (https://livesim2.dashif.org/livesim2/testpic_2s/Manifest.mpd) in multicast with small packet loss percentage (for example by adding ":errsim=0.3x50…
-
I’m trying to set up three OpenDDSharp nodes using RtpsRelayOnly on the rtps.ini configuration file for a scenario where each node is both a publisher and a subscriber. All nodes have static, known IP…
-
I have a RPi camera connected to RPi zero 2w on LAN and v4l2rtspserver setup. I am able to receive the video stream on "rtsp://192.168.1.44:8554/unicast", but can't get a connection on "rtsp://rpiz2w1…
-
In order for a peer to establish multiple links to a router, it needs to set `transport/unicast/multilink` to a value `> 1`. This means that said peer would also be accepting multiple links from other…
-
Genie exception with the following command:
"show ip rpf (ip)" or "show ip rpf vrf (vrf) (ip)"
Parser works with outputs like this:
```
show ip rpf 172.19.1.66
RPF information for ? (172.19…
-
I am connecting dltviewer (tried with v2.26.0, v2.27.0, v2.18.0) with dltdaemon (https://github.com/COVESA/dlt-daemon/tree/master) over UDP. I am able to receive log messages from dltdaemon over both …
-
I only saw unicast examples in the document, is there any example related to multicast for reference?
https://roc-streaming.org/toolkit/docs/manuals/roc_send.html
-
CircuitMatter assumes unicast communication currently. We'll likely need group support when part of scenes and automations with other devices.
-
### Is there an existing issue for this?
- [x] I have searched the existing issues
### Version
equal or higher than v1.16.0 and lower than v1.17.0
### What happened?
When creating dual stack `Loa…
-
As discussed, in order to fix the issue where the qos latency field would take a value smaller than the SDU interval, for Unicast, the latency parameter will refer to the maximum latency set by the ho…