-
**Describe the bug**
when I enable the **CONFIG_USB_DEVICE_STACK=y**, the usb/cdc_acm can work well.
But when I enable **CONFIG_USB_DEVICE_STACK_NEXT=y**, the system will coredump.
**To Repro…
-
Hello,
is there a simple USB-CDC Example outputing "hello world" and returning the recieved string?
That would be very handy!
Michael
-
### Description:
My device sends data out over CDC ACM. When the host PC reboots the device is not (power) reset so it stays in this state. The host is not able to reinit the device so it's missing…
-
[1] changes to mode 3 CDC NCM by default. In this mode the iPhone exposes an Ethernet interface, handled by `kmod-usb-net-cdc-ncm`. This mode is intended for reverse tethering, where the computer shar…
-
I've been using VSCode under Windows with the ESP-IDF framework for a while, but I'm now trying out the esp-iot-bridge project. After using `git clone https://github.com/espressif/esp-iot-bridge` I ca…
-
### Answers checklist.
- [X] I have read the documentation [ESP-IDF Programming Guide](https://docs.espressif.com/projects/esp-idf/en/latest/) and the issue is not addressed there.
- [X] I have updat…
-
### Board
ESP32 wt32-s3-wrover (wt32sc01 plus)
### Device Description
https://github.com/rpolitex/ArduinoNvs
### Hardware Configuration
https://api.riot-os.org/group__boards__esp32s3__wt32__sc01_…
-
Running on a Pi Pico with MicroPython 1.23.0 and whatever the latest version of usb-device-cdc is in mip; code to reproduce:
```python
from utime import sleep_ms, time
from _thread import start_new…
-
I have upgraded from v6,2 to the latest firmware (built using MPLAB.X, config set for PB v4, no errors).
Programmed using pirate_loader without errors. After update the USB serial port did not com…
-
Hi, i've successfully built and used the "SimulateCDC" example, but it has a few issues:
- It forces you to connect two hardware uarts together externally which is a bit silly (if possible i'd like…