-
Button is wired to the VREG
-
Hi, I have similar issue with another macropad tool, basically, I am able to upload the config to my 12key,2knob macropad, but once I unplug the cable and connect it via bluetooth the config resets to…
-
I've been testing for a few days and can conclude that the VL805 does not like USB MIDI devices getting unplugged. It may reset the entire USB bus. This means that mass storage devices are unmounted a…
-
### Port
ESP
### Target chip
ESP32-S3
### Hardware Configuration
ESP32-S3-Devkitc-1 v1.0 to ESP32-S3-Devkitc-1 v1.0 via USB cable attached from one USB port to the other USB port.
Alo…
-
Hello,
I am currently facing an issue with one of two RealSense D456 cameras on a production device at a client site . After a month of normal operation, one camera is no longer detected on the sys…
-
As far as I can tell, to use USB-HID, you need to change boot.py to include:
```
import pyb
pyb.usb_mode()
```
However, this is not really an option with MicroHydra, so I propose *before reseting…
-
Constructed a key on a Breadboard with a couple of switches (Reset + AuthOn15)
Here it is shown highlighed in USB devices...
![usb](https://github.com/user-attachments/assets/cd188ec3-4f62-4e9c-…
-
**Describe the bug**
Installation process resets and/or disables all USB devices when installing to an USB external device (case with SSD). It seems that it disables USB plugged drives/devices when i…
-
The PEAK PCAN-USB FD adapter is connected to custom electronics with no other nodes on the bus.
Sometimes the firmware resets especially during testing. If a message is sent to this single node while…
-
Tried booting live ISO from USB and hard disk as loop and in both forms ISO failed to boot complaining of kernel panic . Had to hard reset laptop both times.
Please check and update in next ISO rel…