-
Per written feedback, this issue is to track support for connecting a device through USB/Serial ( /dev/ttyACM0, /dev/ttyUSB0, ...) for cases where there is no wifi (RAK devices) and the laptop/PC is n…
-
Is it possible to set the USB "iSerial" (i.e. device serial number) with mxt-app? So far, I haven't found a way to do so.
-
I am using USB serial intefaces P2P link with simple config as this:
[[Serial Interface]]
type = SerialInterface
interface_enabled = True
# Serial port for the device
port = COM1…
-
To reproduce, build and flash this code to a Pico (not Pico W because the LED won't blink):
```
#include
#include
#define LED_PIN 25
int main() {
stdio_init_all();
gpio_init(LED…
-
Hello Collin, would this run on ESP-32 Dev Kit C V4? Does anything else need to be changed? The data comes via 'USB serial port' ??
Nice greetings from Germany[
![Screenshot 2024-04-25 at 21-50-49 E…
-
This can be achieved per the TRM (page 942).
The first part would eliminate the need to enable the internal PHY alongside with Wi-Fi which apparently is not recommended per the manual.
The secon…
-
Hi! i have a scale for trucks, it is old, it has a serial port, im building a flutter program to comunicate with the scale. If i read data from it with a hyperTemrinal i end with data like this 'F000…
-
I started some tests with the serial USB (OTG) on the STM32u575 to get a virtual com port on a Windows PC.
After fixing some issues with the clock config file (because it was never used and tested …
-
**Describe the bug**
USB device serial numbers may change between current `device` stack and the `device_next` stack for the same MCU.
**To Reproduce**
Steps to reproduce the behavior:
1. `west …
-
### Board
esp32-s3-devkitc-1
### Device Description
esp32-s3-devkitc-1
### Hardware Configuration
Both USB OTG and UART connected to macOS via separate USB cables.
### Version
v3…