-
Hi i would love to use this awesome Dietpi fork for my old U3 - sadly i realized that there are no Kernelmodules for the FTDI Chips included.
is it possible for you to recompile those for me? i woul…
-
### The problem
After a forced shutdown caused by a power blackout, my Home Assistant installation no longer detects the Bluetooth dongle I'm using (ASUS_USB-BT500). The device appears in the hardwar…
-
Hello and thanks for this piece of software!
We recently switched JMRI: https://jmri.org over from PureJavaComm to jSerialComm to future-proof it.
One issue we are just now running into: Since L…
-
Would it be possible to add support for USB-to-serial adapters such as CDC, FTDI FT232xx, CH340, SiLabs CP210x, etc.?
This would be very useful e.g., to connect USB printers via USB to the ESP8266.…
-
Keyspan made several USB-serial devices popular with Mac users, including one with dual mini-DIN8 connectors. They work with Linux if you have the firmware, and it comes with the standard Linux-firmwa…
-
The USB to serial adapters used for the Lidar and the UWB cables are identical and as such any rules in `/etc/udev/rules.d/` cannot specify the difference between the two of them. The suggested improv…
-
Hello and thank you so much for sharing this tool!
It took me a while to figure out, but with the TrippLite USA-19HS USB to serial adapter, you have to replug the device and click the plot button w…
-
Some printers' boards, such as for instance the Creality Ender 2, don't have RX/TX GPIOs for serial communication, which means this project cannot be used with them. As these are mostly inexpensive pr…
-
### The problem
in `/homeassistant/generated/usb.py` there are some entries for VID/PID combo's that identify USB dongles with a specific integration.
For Z-Wave JS this is included in the file:
…
-
Existing sensor definitions can be found [here](https://github.com/kellerza/sunsynk/blob/main/src/sunsynk/definitions.py)
### You Inverter Deye5kSg03LP1
Details about your Inverter: make/model/f…