-
May i Know the reason for this error??How do i fix this problem??
-
Hello everyone, I'm building a CNC and while I'm waiting for the mechanical parts, I already built the electrical board which include an Arduino with GRBL v1.1h, DM566 as stepper drivers and one chine…
-
The Samsung 16LF01UA3, 16LF01UA4 and VFM161LSA1 all use the OKI MSC1937-01 VFD controller witch is a clone of the original Rockwell 10937 VFD controller.
Any VFD display that is based on the Rockwe…
-
Do you know if is it possible to adjust/reduce brightness on these displays?
(I guess some specific serial cmd is required)
EDIT: according to the [manual here on page 32](https://www.matrixorbi…
-
Hi @anpaza
Thanks for writing linux_vfd!
I have been trying without success to build linux_vfd for Linux 5.12 under Manjaro ARM. Should this driver work with recent mainline Linux kernels or do…
-
In `tcp.c`, line 35, setting `TCP_NODELAY` will make the TCP stack on the remote device (e.g. ESP8266) too busy with memory allocation and other things. I suggest to disable it and let TCP stack choos…
-
Looks like there is a problem with the spindle selection drop down. I have a PWM (laser) and a VFD spindle connected. Using the $Spindle command I can see:
$spindles
0 - PWM, enabled as spindle 1
…
-
I was wondering if there may be much interest in porting this library to MicroPython? I have some MCU's running MP that I would love to use this library with to drive a GU128x64 VFD. I think it would …
-
-
```
What steps will reproduce the problem?
1. Once the box is booted, the display resets to 00:00 and counts upwards.
With the HDMU Image, if correctly resets itself to us the time from the Skin /
…