-
Hi, I was searching the repository and didn't find anything similar to this question, so I'm going to ask it.
First, I’m using an Arduino Uno R3 with an Ethernet shield W5100 connected to Johnny-Fi…
-
El tema a debatir es si puede hacer/crear una casa domótica con arduino + shield ethernet w5100 + sd como Maestro servidor web y conectar varios esp8266 con funciones diferentes y específicas como esc…
-
Hi All,
I know this project is likely dead, but I was hoping for some charity this time of year...
I have been testing the TCP on the Uno with a W5100 as a slave and cannot seem to read anythin…
-
How to reproduce the issue :
```
EthernetUDP mcast_udp;
IPAddress mcast_group(230, 1, 1, 1);
uint16_t recv_port = 49500;
uint16_t dest_port = 49600;
mcast_udp.beginMulticast(mcast_group, recv_po…
-
There exist some hardware bugs in the W5100 (https://www.wiznet.io/wp-content/uploads/wiznethome/Chip/W5100/Document/3150Aplus_5100_ES_V260E.pdf)
I would like to ask people (in particular @oliversc…
-
Hello,
there is know W5100 erratum which causes that socket.cpp -> EthernetClass::socketSendUDP() never returns. It happens during asynchronous bi-directional UDP communication when one packet is b…
-
_From @JanosAudron on April 11, 2013 20:37_
Hardware:
Arduino UNO + Ethernet Shield
Software:
IDE 1.0.4 and 1.5.2
After some test I think the problem of the crash of W5100 chip that make it unrespo…
-
I have an old Arduino Uno (not R3) with Ethernet W5100 Shield and a RS485 Adapter with Max1348 chip (GND, RXD, TXD, 5V). I use Arduino IDE 2.0.2 (but also tested legacy version 1.8.19).
So I commen…
-
_From @LoathingKernel on February 1, 2014 12:35_
@MarekLew wrote:
Library TFTP wrong use registers REG_S3_RX_RD0, REG_S3_TX_WR0, REG_S3_RX_RSR0.
Trying to modify AriadneBootloader for W5200 and ATm…
-
```
What change would like to see?
Replace the current ethernet shield w5100.h and w5100.cpp files with the files
attached.
Why? By removing the comment slashes on "#define W5200" in w5100.h will co…