-
hello, first of all congratulations for this fantastic software. I am using version 1.9.2b7a018 on windows using the original adapter for PS3 with WinUSB drivers (Zadig). I noticed that the software r…
-
Can we use this package without installing the WinUSB driver or there is a way to silently install the WinUSB driver through code?
I tried using `usb.useUsbDkBackend()` from the `node-usb` package …
-
Issue encountered using a Mayflash controller adapter, after following the instructions to install WinUSB and ViGEmBus.
Attempted solutions: changing gcfeeder configurations, using a different versio…
-
Hi!
I want to work with usb devices in Go, On linux i just have to install libsub, But on windows i have to install a lot of building tools, some times it doesn't work properly!
I just want to insta…
-
Hi,
i am using a RTL SDR v4 with rtl_433 under Linux no problem. Everything works fine.
Under Windows i used Zadig to switch my Blog v4 device to WinUSB (v6.1.7600.16385).
But if i run rtl_433…
-
Hi!
Noob question, hopefully not too much unrelated:
Is it possible to force the usage of WinUSB driver when I insert the dongle on a new USB port for the first time?
In other words - If I want …
-
Currently WinUSB has to be setup for the controller manually (big thanks to MS for making the controller not provide any useful USB/HID descriptors, even though it can speak HID fine...)
The instru…
-
NOTE: I was able to reproduce this problem with upstream oss-cad-suite packages from YosysHQ , such that this is not apio specific.
On my windows box 'apio upload' fails with the apio dev version b…
-
Hi!
First of all, thanks for your great work!
I am playing around with the esp32C3 and probe-rs 0.24.0.
After installing the correct WinUSB drivers with Zadig I can download a [sample firmware](htt…
-
As discussed in #61 , it may make sense to create a new libusb backend to remove some limitations of the native HID APIs under Windows. The users will need to use WinUSB driver to replace the native H…
mcuee updated
3 weeks ago