-
*Michael:*
After Upgrading from 19.07.8 to version 21.02.0 the 5 GHZ WLAN is not working any more.
The WLAN gets shutdown by DFS.
FYI: Same freqency was used (channel 52) on 19.07.8 - worked perfek…
-
I run supernode 3.0 on ubuntu , and test edge 3.0 on ubuntu,win10,openwrt(AR9344 mips24kc),openwrt(MT7620 mipsel24kc). Only the edge on openwrt(AR9344 mips24kc) could not connect to the supernode , …
-
请教下,下载后在wndr4300 v1 (Atheros AR9344 rev 2, mips_24kc)上的openwrt上运行时,没有任何反应,用-v没有输出,用--debug及--log-file也不会生成日志,此平台上是否可用,谢谢!
-
你好,我是小白...
我的路由器是网件的wndr4300 使用的是AR 9344芯片组,以mips为内核。不知道这个mips是不是就你所指的rampis CPU,可不可以使用这个插件?
-
*efs:*
**> If your device is not supported by the image
You may encounter the error “Device not supported by this image” or “Image check failed”. In that case, please report the issue so that it…
-
大大您好,能否为这个固件添加单线并发多拨的选项?
之前是用这位大大的固件,自己的机器是wndr4300,现在换了新设备linksys 1900能否百忙之中帮忙解决下。十分感谢。
http://www.right.com.cn/forum/thread-146171-1-1.html
-
本地 sscap 测试FullCone,游戏模式下是udpblocked
成都移动 rixcloud
-
**Package:** frps_0.38.0-1_arm_cortex-a9_vfpv3-d16
**Model:** Linksys WRT3200ACM
**OpenWrt Version:** 19.07.7
**Behavior:**
```
root@cn1:~# frps
root@cn1:~# error relocating __nanosleep_tim…
-
你好,在之前,我在斐讯k2路由器,刷了openwrt后,使用你在项目中提供的md5文件,顺利的连接上了,并正常使用。今天我尝试了用(网件)WNDR4300,刷了openwrt(较新版本),提示了这个错误,看起来md5不兼容,请问大佬有什么解决的思路吗?
上文中提到的openwrt系统版本均为 https://github.com/coolsnowwolf/lede 二次编辑而成,按照理论,系统底…
-
### Describe the bug
installed xray-core 1.8.3 using opkg
the service script was installed to /etc/init.d/xray, but the service wasn't autostart.
try to service start xray, it still didn't work.
#…