-
Even though the kernel does all the accounting, having many iptables rules can slow down a home router, especially if its already nearing its NAT throughput limit.
-
如图
![Snipaste_2020-11-25_21-47-17](https://user-images.githubusercontent.com/16099156/100236256-5289f380-2f25-11eb-978c-f7372dfcbbe5.png)
-
I was recently asked to switch my internet setup from PPPoE to DHCP by my ISP and after that my wrtbwmon table has become overrun with entries for the WAN interface like this: http://img.mystphy.sx/ss…
-
为何流量是0,该如何设置
eijs updated
9 months ago
-
我所有的设备流量都是零,我用的是OP系统,N100软路由。用了Passwall。请问如何设置,可以使得插件能获取各个设备使用的流量。
-
```
Running DD-WRT v24-sp2 (11/21/10) std-usb-nas - build 15778 on a Linksys e2000.
Everything works great, except there is no "total usage" value. See attached.
```
Original issue reported on cod…
-
能加入一分钟提醒上传和下载流量就好了,单独分开
客户端名: xxxxxxx
客户端IP: 192.168.1.219
客户端MAC: xxxxxxxxxxxxx
总计流量: 65.23 MB
一分钟内总流量: 6.00 MB
一分钟内上传流量: 2.50 MB
一分钟内下载流量: 3.50 MB
在线时间: 55 分 0 秒
-
9.27 r2s实时信息-速率页面不正常,没有相关数据,只会显示(正在收集数据...),wrtbwmon装完也是一样,不显示相关数据,一堆零。。
-
```
Running DD-WRT v24-sp2 (11/21/10) std-usb-nas - build 15778 on a Linksys e2000.
Everything works great, except there is no "total usage" value. See attached.
```
Original issue reported on cod…
-
```
Running DD-WRT v24-sp2 (11/21/10) std-usb-nas - build 15778 on a Linksys e2000.
Everything works great, except there is no "total usage" value. See attached.
```
Original issue reported on cod…