-
> 请先搜索确认没有重复后再提交issue,以下内容若未按照模板填写,不做任何回复,3天后若未更新直接关闭issue.
固件版本(必填):1.0.2
App版本(与app控制有关时必填):
Android版本(与app控制有关时必填):
是否使用服务器(必填):使用mqtt服务器
问题描述(包含复现issue方式):拔TC1的插头重新插入通电,一切正常,但是长时间以后…
-
1. 请问能否增加mqtt
2. 请问通信协议是否和原版https://github.com/a2633063/zTC1一样?
谢谢
-
> 请先搜索确认没有重复后再提交issue,以下内容若未按照模板填写,不做任何回复,3天后若未更新直接关闭issue.
固件版本(必填):v1.2.0
App版本(与app控制有关时必填):v1.10.1
Android版本(与app控制有关时必填):安卓10
是否使用服务器(必填):是
问题描述(包含复现issue方式):之前在qq上听您说过ztc1支持ipv6的m…
-
感谢作者的固件,不知道作者还维护否,看到去年有相同的issue
同样的问题,如果路由器重启,或者插排重启,断电等操作,都会导致wifi断开,wifi断开后插排就连不上了,无法控制,只能重新配网。
固件版本(必填):1.2.1
App版本(与app控制有关时必填):1.11.3
Android版本(与app控制有关时必填):11
是否使用服务器(必填):使用mqtt
…
-
Hi Experts,
we verified in the Libreswan 4.3 that the multiple proposal for ikev1 and ikev2 is working fine in the below format. i.e if DH group is same for all proposals
3des_cbc-sha256-**dh1…
-
固件版本(必填):1.2.1
App版本(与app控制有关时必填):v1.12.0
Android版本(与app控制有关时必填):
是否使用服务器(必填):MQTT
问题描述(包含复现issue方式):ZTC1配网完成激活后,再使用MQTT时,激活会变成未激活,重新激活后,再次点击MQTT云朵图标后,仍变成未激活,需要重新激活。
-
homeassistant更新后不支持light的mqtt配置
-
插口4设置成电脑,周一到周五7:50开,18:00关。插口6设置成手机充电,每天9:30开,11:00关。现在的BUG是,每天9:30手机充电不会打开,反而电脑插口到9:30会自动关闭.希望修复BUG,固件版本0.10.1,APP版本0.9
tljim updated
3 years ago
-
固件版本(必填):1.2.0
App版本(与app控制有关时必填):1.10.1
Android版本(与app控制有关时必填):9
是否使用服务器(必填):是
问题描述(包含复现issue方式):
1,6插口无负载
3,5插口定时开启关闭
发现5插口定时任务关闭时候偶尔会触发所有接口关闭, 当时使用功率15w左右
之前也出现过莫名的接口全部关闭情况但当时没发…
orzuu updated
3 years ago
-
固件版本:0.10.4
App版本:0.11.5
homeassistant 0.97.2
问题描述(包含复现issue方式):
tc1已经接入hass,从昨晚用到现在无任何故障。
插口状态
1、开 负载中
2、开 负载中
3、关 无负载
4、开 负载中
5、开 负载中
6、开 负载中,接音箱
总功率约为100W,平稳
现象,在 hass …