-
* System configuration:
* Pycom board: LoPy1.0r (with deep sleep shield DS v1.0)
* Firmware version: (sysname='LoPy', nodename='LoPy', release='1.17.5.b6', version='v1.8.6-849-56d00234 on 2018-0…
-
It would be nice if Bruce could include RFID125khz tag reading with a Grove RFID UART module
https://wiki.seeedstudio.com/Grove-125KHz_RFID_Reader/
Working Example
```
#include
#include
…
-
I've got RFID card which HEX number is 330092A6D7 (this number gave me a women, who generates cards - she sees such a number in their system).
My problem is, that RDM6300 library returns only part o…
-
HI there
I hope you can help.
I have a LinkIt ONE kit. I purchased the 125Khz RFID module - UART SKU: RFR101A1M.
I have downloaded the Seeed-Studio/RFID_Library files.
I have found the SoftwareSer…
-
I recently purchased a Grove 125kHz reader but it only reads tags from 0.5cm distance or less. Is there a library maybe that would enable setting the gain of antenna? Or is there any other way to incr…
-
After adding a PyCom board to a Project on pybytes with PyMesh
Board updates to
Firmware: 1.20.2.rc11
PyBytes: 1.5.2
But now continually reboots with core dumps:
Rebooting...
ets Jun …
-
I have a same issue that previous, but in a different module.
I use a Ebyte e22-900m22s module, that have a LoRa chip llcc68, its seems a semtech 126x.
The data from this devices is [here](https://w…
-
It would be useful for Greaseweazle to be able to DC-erase all or a subset of the tracks on a disc. This is done by enabling the write gate but sending no flux transitions.
This can be useful when …
-
Hi
I just receive "RFID Test.." message in my monitor serie of Arduino UNO (also with TEST and DEBUG on), the tag that I am using is the typical EM4100 125khz RFID Key (RFID Tag). I am sure that re…
-
Hello,
We purchased (3) of this GROVE 125KHZ RFID READER from DigiKey, installed this library, and we are
trying to simply run the example INO project, however, it requires another library, "Softw…