-
Filesystem labels are allowed spaces. The script is passing the new label unquoted/unescaped, so it ends up being `mkfs -t ext4 -L NEW NAME /dev/nvme0n1p2` and failing.
-
After flashing your jetson-image using **`flash.sh`** , it successfully boots on the first attempt. However, subsequent attempts to boot fail. The initial boot is successful, but subsequent boots resu…
-
Hi,
I have seen that in the latest software release (NRZ-2017-099) a lot of sensor have been added.
SDS011
PMS1003, PMS5003, PMS6003, PMS7003
PMS3003
DHT22
HTU21D
PPD42NS
BMP180
BMP280
…
-
The readings I am receiving from the load cell through the ADS1256 fluctuate around 0.5lbs. This causes the motor to oscillate when trying to hold a constant pressure on the pressure. I have mitigated…
-
I've implemented an ON/OFF relay for controlling my dew heater and have the indi-allsy 'Dew Heater - Standard' working - thanks for adding all this in, it's been timely for us down-under!
Is there…
-
The Raspberry Pi Z2W was announced today [1], and I've got one in the mail.
I intend on using it for another build (using up my batch PCB order). As far as I can tell, everything matches up with th…
-
Just wondering if this library can be used with the 12-bit ADS1015, or if I need to adjust the library for use with my 12-bit board.
-
現在 chirimen.org の更新が難しいという声があるが、その原因はいくつかあるように思います。
既に解消しているものはそう分かるように、解消できないものも緩和する方法があるものはそうしたいのでルールとドキュメントの整理をしたいです。
以下は私が見て思った現状とそれに対する提案です。合意が取れるようであれば How To を README なり /feedback ページなりに記…
-
## Introduction
Zephyr is missing documentation and build time validation of device drivers. This results in avoidable, obscure errors during development, and having to look through source code, Kc…
-
If I run any task from vscode for example 'Build Hellen NB1' it always fails after the bootloader compilation with the following error:
Creating blbuild/fome_bl.list
text data…