-
Hi Aster94
I'm using library with an Arduino BLE Sense with embedded Gyroscope and an external micro display. It seems it needs seconds to stabilize values, should I use an external IMU or what I'm d…
-
Hi,
How do I read 6DOF from a remote machine (on which I wish to impliment the head tracking algorithms)?
I set opentrack input to UDP over network, click the hammer and all I see is a port number a…
-
Hi Kris.
I was running some timing tests using your Basic_AHRS sketch, but just using wire and comparing it the results on a imrtx1050. Using the sketch on the Arduino as is (read the interrupt stat…
-
Hey Kris, I am new to arduino and IMUs in general and learning as I go. I am using versions of you code, which I have adapted to take any number of IMUs. I am working on a wearable device which might …
-
Hello kriswiner,
I read you article: https://github.com/kriswiner/MPU-6050/wiki/Simple-and-Effective-Magnetometer-Calibration and I am wondering about a few things:
. do you know if in the Android OS …
-
Hi kris, hi guys
For a project i am using the current mpu9250.h
I need to skip the calibration routine on standard startup, and calibrate only on demand, then saving biases and scale to the eepro…
-
Hi Kris,
I'm using a MPU9250 mounted on a Freematics One + https://freematics.com/pages/products/freematics-one-plus/
And I would have 2 questions regarding the calibration of the accelerometer…
-
Hello,
I'm playing with an arduino mega 2560 board since few weeks (my goal is to learrning C by practice).
Everything was fine until i want play with external librairies ...explanations.
I bou…
-
1. Stratux version: v0.8r2
2. Stratux config:
SDR
[ ] single
[X] dual
GPS
[X] yes
[ ] no
type:
AHRS
[X] yes
[ ] no
power source: wall war…
-
If anyone is interested in implementing GDL39 -
http://www.chartbundle.com/tech/gdl39/
Interesting paper: http://cseweb.ucsd.edu/~savage/papers/CCS14MobileCockpit.pdf