-
Hi Bodmer,
I still experiment your good TFT library on AiThinker ESP32-CAM with Arduino IDE. Last library version 2.5.0.
After some attemps to get the right pins for a TFT SPI bus, and CS, DC…
-
**Operating environment/Installation (Hass.io/Docker/pip/etc.):**
Hass.io on a VM
**ESP (ESP32/ESP8266, Board/Sonoff):**
ESP32-S Camera (AI THINKER board)
**Affected component:**
https:…
-
### CircuitPython version
```python
Adafruit CircuitPython 7.2.0 on 2022-02-24; AITHinker ESP32-C3S_Kit with ESP32-C3FN4
```
### Code/REPL
```python
from adafruit_ble.services import Service
from…
-
## 1. SDK version(SDK 版本)
{
4.2
}
---
## 2. In what kind of operation problems appear, and how to reproduce the problem ?(什么样的操作步骤问题会出现,是否是稳定复现,如何复现问题?)
{
I am tryin…
-
Hi,
I have Ai-Thinker's A9G board, it works well with Ai-Thinkers firmware, AT commands, GPRS, GPS, Internet, all stuff.
I registered its IMEI on your website.
Then I flashed [Logicrom core](http…
-
Hi, thank you for making wonderful CSI project. And I have some questions.
As far as I know, rx gain should be fixed (= Automatic gain control should be disabled) to obtain meaningful CSI data whic…
-
Hello, i have pico with burned picoprobe.
I short pin 4 and pin 5 (uart rx and tx).
I open serial terminal, send some chars in terminal and recieve nothing :/
Is i do something wrong ?
why picopro…
-
Using the MWE below, I can utilise 16 and 32 bit bits per sample but 24 ominously does not work and only outputs a stream of 0s.
Replacing `int24_t` with `int32_t` and `AUDIO_HAL_BIT_LENGTH_24BITS ` …
-
### PROBLEM DESCRIPTION
_A clear and concise description of what the problem is._
When using firmware 12.5.0 there is no recording/image. So I went back to firmware 11.1.0 and the image is bac…
-
### Describe the bug
Just used the example code from Arduino IDE "Async_AutoConnect". The code successfully compiles and uploads in AIThinker ESP32CAM
### Expected behavior
It should give a c…