-
Because of the special read protocol (CS has to go HIGH-LOW-HIGH at the end of a read, lines 638-642 in sparkfun_qwiicas3935.py) the normal SPI0.0 CS of the PIi (board.CE0) cannot be used.
You have t…
-
**Operating environment/Installation (Hass.io/Docker/pip/etc.):**
doesn't matter
**ESP (ESP32/ESP8266, Board/Sonoff):**
doesn't matter
**ESPHome version (latest production, beta, dev branc…
-
https://github.com/adafruit/CircuitPython_Community_Bundle/tree/master/libraries/drivers
This wasn't discoverable so there is a second library for this sensor here: https://github.com/BiffoBear/Cir…
-
Run esphome on Windows 10 via command line
**Nodemcu:**
**Affected component:** AS3935
**Description of problem:**
in sensor.py, I believe there is a cut and paste error for the …
-
**Operating environment/Installation (Hass.io/Docker/pip/etc.):**
Docker 1.15.0-dev
**ESP (ESP32/ESP8266, Board/Sonoff):**
Wemos D1 Mini
**Affected component:**
as3935
…
Sc0th updated
2 years ago
-
Add support for more environmental i2c sensors
more models
more types (dangerous gases, air quality)
-
When running example 1 from the library, I get the following error using I2C.
AS3935 Franklin Lightning Detector
Traceback (most recent call last):
File "tune.py", line 34, in
if lightnin…
-
### PROBLEM DESCRIPTION
AS3935 is detected on I2C on cold starts but goes missing if the device is restarted
### REQUESTED INFORMATION
_Make sure your have performed every step and checked …
-
### PROBLEM DESCRIPTION
_A clear and concise description of what the problem is._
I have a Hiking DDS238-2 WIFI, when I try to configure it with the template ```{"NAME":"Hiking DDS238-2 WIFI",…
-
i cant install nvidia-dkms 525.89.02
log say
`==> dkms install --no-depmod nvidia/525.89.02 -k 6.2.6-zen1-1-zen
Error! Bad return status for module build on kernel: 6.2.6-zen1-1-zen (x86_64)
Co…