-
Johnny Quest
Sat 18 Jun 2016 04:51:15 AM UTC
Hello:
First off, I have done my homework on this matter and would not have posted seeking assistance unless it was a last resort. smiley
This message …
-
It would be great to provide urboot hex files for non-default serial port. I think this is one of the major missing feature from urboot.
As per the previous discussions in avrdude, it may not be so…
-
Updated:
JTAG2UPDI | ATmega4808 | AVR128DA32
-- | -- | --
Read from EEPROM (-U) | ✅ | ✅
Write to EEPROM (-U) | ✅ | ❌
SerialUPDI | ATmega4808 | AVR128DA32
-- | -- | …
-
It seems avr910 is a bit verbose even with `-qq` option. It seems to me that we should probably take the programmer related info out with `-qq` option.
```
PS C:\work\avr\avrdude_test\avrdude_bin>…
mcuee updated
2 years ago
-
Just for fun, I tested the avrdude.conf file Arduino IDE ships with, and it appears that it has a few errors in it. None of them are crucial when using official Arduino hardware. Wouldn't it be better…
-
I think this may not be a real issue but kind of strange behavior of the optiboot bootloader firmware.
I jusgt bought a few Uno Clones with CH340. Apparently due to chip shortages the boards come w…
-
Wed 21 Dec 2011 12:06:51 PM UTC
I've been successfuly programming this device for several months now.
(If **[bug #34302](https://savannah.nongnu.org/bugs/?34302)** gets fixed shortly I'll submit an …
-
Hello,
using XUbuntu 22.04 LTS, Arduino IDE 2.0.0-rc8 and megaTinyCore 2.5.11 editor suggestions do not work for the following board entries:
```
ATtiny3224/1624/824/424 w/Optiboot
ATtiny3226/16…
-
### Report: Incorrect SerialUPDI control of AVR64EA32
This is a known bug as of commit 481a91d.
1. You are trying to read the "Chip Silicon Revision" register without checking the status of the …
-
Wed 22 Dec 2004 11:37:26 PM CET
New devices: mega329, mega3290, mega649, mega6490. They share a common datasheet. These are part of the "LCD AVR" family.
Need headers, and patches for binutils, gcc,…