-
**_Reported by Piotr Mienkowski:_**
Add Atmel SAM family GMAC Ethernet driver. GMAC Ethernet driver is used among others by SAM E70, SAM V71, SAM4E series SoCs. This driver is distinct from EMAC Ethe…
-
**_Reported by Piotr Mienkowski:_**
Add preliminary support for [Atmel SAM E70 | http://www.atmel.com/products/microcontrollers/arm/sam-e.aspx] (Cortex-M7) chipset family and SAM E70 Xplained board.
…
-
**_Reported by Piotr Mienkowski:_**
Add preliminary support for [Atmel SAM E70 | http://www.atmel.com/products/microcontrollers/arm/sam-e.aspx] (Cortex-M7) chipset family and SAM E70 Xplained board.
…
-
**_Reported by Piotr Mienkowski:_**
Add preliminary support for [Atmel SAM E70 | http://www.atmel.com/products/microcontrollers/arm/sam-e.aspx] (Cortex-M7) chipset family and SAM E70 Xplained board.
…
-
To whom it may concern,
Here in our company, we would like to use sam-ba 3.1.4 to flash the module we are used to work with (AT91sam9x35-CM), as we are experiencing some issues with sam-ba 2.15. Mo…
-
Working on a STM32F030 system. The issue is: start some tickers with short period ( a few milliseconds) do things like control LED arrays via SPI/I2C, read/write from serial etc. After a while, some,…
-
Hello,
I am writing mostly with regard to issue [#65](https://github.com/linux4sam/meta-atmel/issues/65), which is closed now.
Will you please apply the changes to the board SAMA5D3 Xplained? (sama5d…
-
The layout you suggest for installation is incorrect. It _WAS_ correct for the older versions of Arduino. 1.6 and beyond lays things out in a much better way.
Here is how I did the installation:
under…
-
Stino will support more custom Boards and Cores.
### 1. Supported boards and Cores
- [x] [Arduino AVR Boards](http://arduino.cc/en/Main/Products) - Atmel ATmega-based boards from [Arduino](http://ard…
-
There is a hardware [library](https://github.com/rogerclarkmelbourne/Arduino_STM32) to support STM32 based boards like the LeafLabs maple and other generic STM32F103 based boards. Is it possible to su…